New York, NY -- (SBWIRE) -- 12/19/2018 -- Sound Reception System Market: Introduction

Sound reception systems are electronic acoustical navigational aids and they enable a ship's crew to hear audio signals generated from outside an enclosed bridge. The sound reception system is installed to look-out as required by the International Regulations for Preventing Collisions at Sea, 1972 standards. As an option, sound reception systems can also be installed on vessels lacking fully enclosed bridges. Speakers and sound amplifiers are installed in the wheelhouse and usually, four water resistant microphones connected to the system are installed outside. The output sound levels are controlled by the Whistle Systems and PAGA.

Sound Reception System Market: Drivers and Challenges

The reliability of a sound reception system generates significant demand for installation on ships with a totally enclosed bridge. Also, the rising requirement of personnel and navigational safety results in increasing integration of sound reception systems. Innovations, such as installation of local audio monitors and controllers for early detection of oncoming vessels, make the sound reception system safer and increases its demand. These are some factors driving the global market for sound reception systems. Also, company development and increase in revenue generation is estimated to enable growth in the global sound reception system market. Qualities, such as automation of sound reception and distribution of control functions drive the growth of the sound reception system market. Moreover, in case any part of the sound reception system fails, the backup speaker can continue to operate and the personnel manning the speakers and the amplifier can be warned of the oncoming vessel, as the control tasks are distributed among various local process controllers. Such factors are expected to propel the global sound reception system market to greater heights.

Request For Sample Report- https://www.factmr.com/connectus/sample?flag=S&rep_id=1433

However, the high power consumption and expensive maintenance and operational services are expected to challenge the growth of the global sound reception system market. Sound reception systems are designed on the basis of their naval applications. This customization requires a lot of planning and it is time consuming. This factor too challenges the growth of the global sound reception system market. The manufacturers have to adhere to stringent naval bylaws while developing such sound reception systems, which is another factor hindering the growth of the global sound reception system market. Further, continuous updates made to the naval regulations in various countries are expected to challenge the growth of the global sound reception system market. Yet, the sound reception system market is anticipated to register continuous growth as drivers will offset the negative impact.

Global Sound Reception System: Market Segmentation

On the basis of industry, the global Sound Reception System market has been segmented as:

Chemical
Oil & Gas
Food & Beverage
Power
Automotive
Waste and Water Management
Other
On the basis of architecture, the global Sound Reception System market has been segmented as:

Engineering workstation
Operating station
Process control unit
On the basis of constituents, the global Sound Reception System market has been segmented as:

Speaker
Amplifier
Microphones
Sound Reception System Market: Regional Overview

Governments and manufacturers in North America are making huge investments to procure efficient sound reception systems. Moreover, the naval personnel safety standards set by the government, compels 'sailor companies' to integrate sound reception systems into their vessels. These factors have enabled North America to register the highest market share. However, with the increasing number of import and export firms in Asia Pacific economies, such as India and China, together with safety standards established by the governments, the region is expected to register the highest growth in the sound reception system market, by the end of the forecast period.

Ask Industry Expert about this Report- https://www.factmr.com/connectus/sample?flag=RC&rep_id=1433

Global Sound Reception System Market: Key Players

Examples of some of the market participants in the global voyage data recorder market identified across the value chain include:

Jotron AS
Kongsberg Maritime
Zenitel
Mackay Communications, Inc.
Omega Integration
H. Brennan
PacAtlantic
Brief Approach to Research

The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application and industry.

The report covers exhaust analysis on:

Market Segments
Market Dynamics
Market Size
Supply & Demand
Current Trends/Issues/Challenges
Competition & Companies involved
Technology
Value Chain
Regional analysis includes:

North America (U.S., Canada)
Latin America (Mexico, Brazil, Argentina, Chile, Peru)
Western Europe (Germany, Italy, France, U.K, Spain, BENELUX, Nordic, Eastern Europe)
CIS and Russia
Asia-Pacific (China, India, ASEAN, South Korea)
Japan
Middle East and Africa (GCC Countries, South Africa, Turkey, Iran, Israel)
The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain. The report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on market segments and geographies.

Report Highlights:

Detailed overview of parent market
Changing market dynamics in the industry
In-depth market segmentation
Historical, current and projected market size in terms of volume and value
Recent industry trends and developments
Competitive landscape
Strategies of key players and products offered
Potential and niche segments, geographical regions exhibiting promising growth
A neutral perspective on market performance
Must-have information for market players to sustain and enhance their market footprint
For more information on this report, please visit: https://www.factmr.com/report/1433/sound-reception-system-market

About Fact.MR 
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.

Contact Us
Rohit Bhisey
Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Email: sales@factmr.com
Web: https://www.factmr.com/

For more information on this press release visit: http://www.sbwire.com/press-releases/sound-reception-system-market-volume-forecast-and-value-chain-analysis-2018-2028-1100470.htm

New York, NY -- (SBWIRE) -- 12/19/2018 -- Shotcrete Sprayer Market: Introduction

A shotcrete sprayer is an equipment used for spraying mortar or concrete with the help of either a wet or dry mix process. Usually, a shotcrete sprayer consists of a concrete pump, a spraying arm, an air compressor, an additive pump and a control system, among other components, while high-end shotcrete sprayers are provided with remote controls as well. The airborne dust created by the use of shotcrete sprayers is significant and owing to this, manufacturers are focusing on investing in the research and development of new technologies, which can be incorporated in the existing designs so as to reduce airborne dust. Moreover, these shotcrete sprayers are used for numerous applications, including water retaining structures, repair works and protective coatings, among many others. Furthermore, these sprayers are designed such that they can be used for manual spraying purposes, which can be handy in applications such as construction works in mines. Such features are expected to increase the adaptability of shotcrete sprayers across the globe for various construction applications.  As the construction industry is augmenting across the globe, the demand for advanced equipment such as shotcrete sprayers is expected to further increase in the coming years, subsequently promoting the growth of the shotcrete sprayers market in the near future. 

Request For Sample Report- https://www.factmr.com/connectus/sample?flag=S&rep_id=1434

Shotcrete Sprayer Market: Dynamics

Technological advancements and increasing investments in the research and development of new materials for construction purposes are expected to be among the prime reasons boosting shotcrete technology across the globe. Shotcrete concrete serves as an excellent tool in providing stability to a structure without the use of a mould in a short span of time. Attributing to this, the demand for shotcrete sprayers is expected to significantly increase over the assessment period. Moreover, with rapidly increasing mobility and space constraints, the demand for underground construction has increased substantially in the past few years. In such construction processes, shotcrete technology serves as an obvious answer, owing to its technical merits over the other processes. This is expected to further supplement the growth of shotcrete sprayers over the assessment period.

Manufacturers of shotcrete sprayers are focusing on improving the features of their products such as improving the production output, control and quality of the spray. Manufacturers are laying emphasis on designing shotcrete sprayers that are more compact in size and can be used in locations having steep inclines. Introduction of such features in shotcrete sprayers is expected to increase the applications of the equipment, subsequently creating opportunities for the augmentation of the shotcrete sprayer market in the near future.

However, the shortage of skilled labour and high initial cost of shotcrete sprayers are estimated to hamper the growth of the shotcrete sprayer market in the long run. Moreover, the transport of concrete mix to certain locations may also be a tedious task, owing to which some contractors are preferring other equipment and processes for spraying purposes, which may derail the growth of the shotcrete sprayer market over the assessment period.

Ask Industry Expert about this Report- https://www.factmr.com/connectus/sample?flag=RC&rep_id=1434

Shotcrete Sprayer Market: Segmentation

On the basis of type of process, the global shotcrete sprayer market has been segmented into,

Dry-Mix Process
Wet-Mix Process
On the basis of product type, the global shotcrete sprayer market has been segmented into,

Robotic Shotcrete Sprayers
Manual SHOTCRETE SPRAYERS
On the basis of application, the global shotcrete sprayer market has been segmented into,

Repair and Maintenance Works
Surface Protection
Underground Construction
Others
Shotcrete Sprayer Market: Regional Outlook

Western Europe is expected to dominate the global shotcrete sprayer market in the coming years, owing to the increasing underground construction activities in the key economies in the region. Moreover, the demand for shotcrete technology is expected to increase in North America and Western Europe, owing to the use of these sprayers as an eco-friendly alternative for concrete spraying. Construction activities in the developing economies of Asia Pacific have witnessed a surge, owing to the increasing demand for affordable housing. This can be one of the key reasons that may promote the sales of shotcrete sprayers in the Asia Pacific region over the coming years.

Shotcrete Sprayer Market: Market Participants

Sika AG
Putzmeister Iberica, S.A.
MacLean Engineering & Marketing Co. Limited.
Meta Therm Furnace Pvt. Ltd.
Gunnite International
Blastcrete Equipment Company
Titan Makina
Normet Group Oy
Surface Finishing Equipment Company
Changge Yingchuan Machinery Manufacturing Co., Ltd.
Getman Corporation
Risen Machinery Co., Ltd.
The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application and industry.

The report covers exhaust analysis on:

Market Segments
Market Dynamics
Market Size
Supply & Demand
Current Trends/Issues/Challenges
Competition & Companies involved
Technology
Value Chain
Regional analysis includes:

North America (U.S., Canada)
Latin America (Mexico, Brazil, Argentina, Chile, Peru)
Western Europe (Germany, Italy, France, U.K., Spain, BENELUX, Nordic, Eastern Europe)
CIS and Russia
Asia-Pacific (China, India, ASEAN, South Korea)
Japan
Middle East and Africa (GCC Countries, South Africa, Turkey, Iran, Israel)
The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain. The report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on market segments and geographies.

Report Highlights:

Detailed overview of parent market
Changing market dynamics in the industry
In-depth market segmentation
Historical, current and projected market size in terms of volume and value
Recent industry trends and developments
Competitive landscape
Strategies of key players and products offered
Potential and niche segments, geographical regions exhibiting promising growth
A neutral perspective on market performance
Must-have information for market players to sustain and enhance their market footprint
For more information on this report, please visit: https://www.factmr.com/report/1434/shotcrete-sprayer-market

About Fact.MR 
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.

Contact Us
Rohit Bhisey
Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Email: sales@factmr.com
Web: https://www.factmr.com/

For more information on this press release visit: http://www.sbwire.com/press-releases/shotcrete-sprayer-market-revenue-opportunity-forecast-and-value-chain-2018-2028-1100471.htm

Oil Drain Valves Market Forecast, Trend Analysis & Competition Tracking - Global Review 2018 to 2028

New York, NY -- (SBWIRE) -- 12/19/2018 -- Conventional oil change is primarily associated with spills and dirty hands. Thus, a new system has been introduced with which one can perform oil changes with ease, speed, safety and cleanliness. Oil drain valves are generally manufactured from stainless steel, brass and corrosion-resistant steel across the globe and can be utilized in combustion engines, construction machineries, etc.

Oil drain valves offer numerous advantages. They offer easy handling owing to the quick release and do not require seal changes. Further, drain valves cannot be lost and enable oil change without the use of tools. Attributing to these benefits, oil drain valves are employed in motorcycles, cars, compressors, cooling systems, marine engines, etc.

Request For Sample Report- https://www.factmr.com/connectus/sample?flag=S&rep_id=1436

Global Oil Drain Valves Market: Segmentation

Globally, the oil drain valves market can be segmented on the basis of material type, product type, end-use industry and application.

On the basis of material type, the global oil drain valves market has been segmented into,

Corrosion Resistant Steel
Stainless Steel
Ecobrass
On the basis of operation type, the global oil drain valves market has been segmented into,

Manual
Automatic
On the basis of end-use industry, the global oil drain valves market has been segmented into,

Automotive
Marine
Construction Machinery
Power Generation
Aerospace
Others
On the basis of application, the global oil drain valves market has been segmented into,

Marine Engines
Generators
Compressors
Pumps
Heavy and Light Duty Trucks
Passenger Cars
Two-Wheelers
Construction Equipment
Others
Global Oil Drain Valves Market: Dynamics                                                                                          

Vehicle efficiency is a key aspect in the transportation industry. Thus, maintenance teams need to perform oil changes as quickly as possible; however, this increases the likelihood of negligence or un-torqued installed oil pan plugs. Conventional plugs must be unscrewed for every oil change, which can lead to various problems. This surges the demand for oil drain valves and in turn drives the global oil drain valves market.

Ask Industry Expert about this Report- https://www.factmr.com/connectus/sample?flag=RC&rep_id=1436

Moreover, the growing demand for equipment such as compressors, pumps and construction machinery, supported by growth of respective end-use industries, is expected to push the demand for oil drain valves and thus, assist the growth of the global oil drain valves market across various regions.  

Adoption of Restriction of Hazardous Substance Regulations (RoHS) in the manufacturing process of oil drain valves, while ensuring a safer and cleaner environment for the future is found to be one of the key challenges identified in the global oil drain valves market for manufacturers.

Prominent manufacturers of oil drain valves are found to be involved in the introduction of application-specific oil drain valves. For instance, in August 2017, Fumoto introduced its new engine oil drain valves for motorcycles.

Global Oil Drain Valves Market: Regional Outlook

Geographically, the global oil drain valves market is anticipated to be dominated by Asia-Pacific, owing to the presence of a large customer base in developing countries such as India and China. The Asia-Pacific region is expected to be followed by North America in the global oil drain valves market, supported by increasing population as well as the growing demand for light and heavy commercial vehicles across the United States. North America is expected to be followed by Europe and other regions in the global oil drain valves market throughout the forecast years.

Global Oil Drain Valves Market: Market Participants

Examples of some of the market participants involved in the global oil drain valves market include Stahlbus GmbH, Fumoto Engineering, The Danfoss Group, Global Sales Group, Argo-Hytos, Femco Drain Technology B.V., ValvoMax, Saf Air Products, Inc., Parker Hannifin Corp, Manik Engineers, India and others.

Manufacturers of oil drain valves across the globe are found to be involved in the innovation and development of new products while adhering to various environmental regulations introduced by various governments. The global oil drain valves market is partly fragmented in nature, owing to the presence of a large number of local as well as established players across the globe.

The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application and industry.

The report covers exhaust analysis on,

Market Segments
Market Dynamics
Market Size
Supply & Demand
Current Trends/Issues/Challenges
Competition & Companies involved
Technology
Value Chain
Regional analysis includes,

North America (U.S., Canada)
Latin America (Mexico, Brazil, Argentina, Chile, Peru)
Western Europe (Germany, Italy, France, U.K., Spain, BENELUX, Nordic, Eastern Europe)
CIS and Russia
Asia-Pacific (China, India, ASEAN, South Korea)
Japan
Middle East and Africa (GCC Countries, South Africa, Turkey, Iran, Israel)
The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain. The report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on market segments and geographies.

Report Highlights:

Detailed overview of parent market
Changing market dynamics in the industry
In-depth market segmentation
Historical, current and projected market size in terms of volume and value
Recent industry trends and developments
Competitive landscape
Strategies of key players and products offered
Potential and niche segments, geographical regions exhibiting promising growth
A neutral perspective on market performance
Must-have information for market players to sustain and enhance their market footprint
For more information on this report, please visit: https://www.factmr.com/report/1436/oil-drain-valves-market

About Fact.MR 
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.

Contact Us
Rohit Bhisey
Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Email: sales@factmr.com
Web: https://www.factmr.com/

For more information on this press release visit: http://www.sbwire.com/press-releases/oil-drain-valves-market-growth-trends-absolute-opportunity-and-value-chain-2018-2028-1100472.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Calcium glycerophosphate is a salt of calcium and potassium from glycerophopharic acid which forms a white and fine powder substance which is in hygroscopic nature. It is widely used as nutrient supplement of calcium and phosphate source and a safe food ingredient in products such as puddings, gelatins, and fillings. It is also present in oral or dental hygiene products like tooth paste and mouth washes due to its cariostatic effects. By the Food & Drug Administration of USA, calcium glycerophosphate is approved as GRAS (Generally Recognized As a Safe).

Get Research Report Overview @ https://www.transparencymarketresearch.com/calcium-glycerophosphate-market.html

The calcium glycerophosphate is widely used in the prevention of dental decay, calcium glycerophosphate, in association with fluorine derivatives, emphasizes the anti-decay action, it therefore allows reduction of the doses of these derivatives and consequently their toxicity In food, use as an additive for a dietetic purpose (substance for mineral contribution).

The global market for the calcium glycerophosphate is fragmented into its product type, and application. Based on the product type, the global market is segregated into oral care (mouth washes & toothpastes), oral calcium products, and pharmaceutical grade. Based on the application, the market is categorized into Nutraceuticals & pharmaceuticals, food additives and others which includes water treatment applications and non-aqueous solubility in solar energy applications.

Calcium glycerophosphate is also available in Liquid form. Calcium glycerophosphate liquids are easily assimilated by the tissues when consumed and is used for treatment of functional anesthesia.

With increasing adoption of healthy lifestyles and rising concern over to get easier nutritional support among consumers leading to expanding their consumption of dietary supplements. Interest in healthy aging, novel and convenient delivery forms, and the expansion of nutrition products are among the many factors driving growth in the mineral supplement industry which in turn will drive the calcium glycerophosphate supplement growth in the market. Calcium glycerophosphate reduces the amount of hydrochloric in the gastrointestinal. For this purpose, it is significantly used as a means of decreasing heartburn, uneasiness related to irritable bowel syndrome, and other gastric problems, which will propel the growth of calcium glycerophosphate market. However excessive consumption of calcium glycerophosphate may lead to various side effects such as high calcium content in the blood, forming of kidney stone and loss of appetite as might hamper the growth of calcium glycerophosphate market.

In terms of regions, the global calcium glycerophosphate market has been diversified into Asia Pacific, North America, Europe, Latin America and Middle East and Africa. Among these regions, the major countries that are largely contributing to global calcium glycerophosphate consumption are U.S., Japan, Germany, India and China. The factors that contributes to the market growth in these regions is the increasing adoption of calcium glycerophosphate for a wide range of applications such as dental cavity treatment and dietary supplements in pharmaceutical industry; observed increasing trend of packed food products in turn leading to demand for food additives such as calcium glycerophosphate.

Get PDF Brochure for more Professional & Technical industry insights: https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=38666

The key market players that are involved in the calcium glycerophosphate market include American Elements, SEPPIC, ISALTIS, DC Fine Chemicals Ltd., Novachem and others.

About Transparency Market Research
Transparency Market Research (TMR) is a U.S.-based provider of syndicated research, customized research, and consulting services. TMR's global and regional market intelligence coverage includes industries such as pharmaceutical, chemicals and materials, technology and media, food and beverages, and consumer goods, among others. Each TMR research report provides clients with a 360-degree view of the market with statistical forecasts, competitive landscape, detailed segmentation, key trends, and strategic recommendations.

Contact us:

Transparency Market Research

90 State Street,

Suite 700,

Albany

NY – 12207

United States

Tel: +1-518-618-1030

USA – Canada Toll Free 866-552-3453

Email: sales@transparencymarketresearch.com

Website:http://www.transparencymarketresearch.com/

For more information on this press release visit: http://www.sbwire.com/press-releases/calcium-glycerophosphate/release-1106038.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Composite coatings are protective layers applied to substrates such as steel, concrete, or metals. They provide excellent corrosion protection and waterproofing. Composite coatings offer protection against fire, heat, corrosion, and harmful radiations. Different layers of composite coatings include adhesive treated substrate, primer, base coat, and top coat. The construction industry is one of the common end-user industries of composite coatings. These coatings are typically used to protect steel from corrosion in the building & construction industry. Composite coatings are used as intumescent and thermal barriers on concrete and other materials. Commonly used composite coatings are light in weight; as a result, they help improve fuel efficiency. Besides construction, other industries that employ composite materials are manufacturing, automotive, aerospace, and oil & gas. Composite materials are coated on various substrates with the help of technologies such as laser melt injection, electroless plating, brazing and others. Composite coatings have attractive properties such as uniform coating thickness, accuracy, and consistency.

Get Research Report Overview @ https://www.transparencymarketresearch.com/composite-coatings-market.html

Rapid expansion in automotive and aerospace industries is the key factor driving the global composite coatings market. Anti-corrosion properties of composite coatings are also anticipated to drive the global composite coatings market. Growth in population and rapid industrialization are major factors boosting the composite coatings market in emerging economies. Attractive growth opportunities offered by the oil & gas industry is expected to propel the composite coatings market in the near future. Technological innovations in processes such as piping system, and downhole tubing systems are anticipated to augment the composite coatings market. Composite coatings are used in coating airframes in aircraft. They are also used to coat wind turbine blades. Increase in awareness about renewable energy is estimated to augment the consumption of composite coatings.

Based on application, the global composite coatings market can be segmented into transportation, oil & gas, building & construction, marine, and metal forming. In terms of technology, the composite coatings market can be classified into laser melt injection, electroless plating, brazing and others. Others segment can be sub-segmented as laser cladding and electrochemical. Composite coatings contain resin and fiber. Commonly used resins include epoxy, polyester, polyamide, and cyanate ester. Fibers can be categorized into glass fiber, carbon fiber, and aramid fibers.

The global composite coatings market expanded at significant pace in 2016. This trend is anticipated to continue during the forecast period. In terms of geography, the composite coatings market can be divided into Asia Pacific, North America, Europe, Middle East & Africa, and Latin America. Increase in population and rise in number of transportation vehicles in China and India are propelling the composite coatings market in Asia Pacific. North America offers attractive growth opportunities to the composite coatings market owing to the expansion in aerospace and defense sectors in the region. Growth in the automotive industry coupled with technological advancements is anticipated to fuel the composite coatings market in Europe. In Latin America, recent advancements in the aerospace industry and building & construction industry are anticipated to drive the composite coatings market in the near future. Rise in immigration and rapid urbanization in Middle East & Africa are boosting the composite coatings market in the region.

Get PDF Brochure for more Professional & Technical industry insights: https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=38714

High degree of competition exists in the global composite coatings market. Key players operating in the market include PPG Industries Inc, Axalta Coating Systems LLC, and Nickel Composite Coatings, Inc.

About Transparency Market Research
Transparency Market Research (TMR) is a U.S.-based provider of syndicated research, customized research, and consulting services. TMR's global and regional market intelligence coverage includes industries such as pharmaceutical, chemicals and materials, technology and media, food and beverages, and consumer goods, among others. Each TMR research report provides clients with a 360-degree view of the market with statistical forecasts, competitive landscape, detailed segmentation, key trends, and strategic recommendations.

Contact us:

Transparency Market Research

90 State Street,

Suite 700,

Albany

NY – 12207

United States

Tel: +1-518-618-1030

USA – Canada Toll Free 866-552-3453

Email:sales@transparencymarketresearch.com
Website:http://www.transparencymarketresearch.com/

For more information on this press release visit: http://www.sbwire.com/press-releases/composite-coatings-market/release-1106042.htm

Social TV Market (Solution - Software (Broadcast Integration, Audience Engagement, Content Moderation, Social TV Analytics, Social Networking Platform), Professional Services (Integration and Consulting, Operation and Installation, and Maintenance and Repairing); Application - Sports, News, TV Shows) Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2018 - 2026

Albany, NY -- (SBWIRE) -- 12/19/2018 -- According to a new market report published by Transparency Market Research the global social TV market was valued at US$ 996.4 Mn in 2016 and is expected to expand at a CAGR of 13.6% from 2018 to 2026, reaching US$ 3,492.7 Mn by the end of the forecast period. According to the report, North America was the largest contributor in terms of revenue to the social TV market in 2016.

Obtain Report Details @ https://www.transparencymarketresearch.com/smart-tv-social-tv.html

Broadcasters focusing on enhancing audience engagement in TV programs/TV content

The social TV market covers the technologies or platforms that support communication and social interaction around TV. Broadcasters are using social media networks to enhance consumer engagement, traditional marketing campaigns, and promotions. With social media networks, entertainment companies can maximize their programming content by integrating broadcast-focused analysis tools across the world. This factor drives the global social TV market. Recent technological breakthroughs in broadband-delivered programming on personal computers and "smart" TVs further boosts the market growth.

Social TV Market: Scope of the Report

The global market for social TV is segmented on the basis of solution, application, and geography. Based on solution, the market is segmented into software and professional services. The software segment is further categorized into broadcast integration, audience engagement, content moderation, social TV analytics, social networking platform, and others. Professional services are sub-segmented into integration and consulting, operation & installation, and maintenance & repairing. In terms of application, the global social TV market is bifurcated into sports, news, TV shows and others. TV shows application is estimated to account for the largest market share in 2018 as TV broadcasters are focusing on engaging audience in TV shows. For instance, reality shows such as American Idol and Dancing with the Stars take advantage of these new capabilities, integrating fan voting and audience polling.

Request a Brochure - https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=1028

Geographically, the global social TV market is divided into North America, Asia Pacific, Europe, South America, and Middle East & Africa. North America and Europe dominate the global social TV market. This is due to broadcasters in these regions using social media to enhance consumer engagement, traditional marketing campaigns, and promotions. The Asia Pacific region is expected to register the highest growth due to increase in social media users with rise in internet penetration.

Global Social TV Market: Competitive Dynamics

Social TV platform providers are focusing on providing flexible and easy-to-use platforms. Merger and acquisition in the social TV market further increases the competitiveness in the market. For instance, in June 2014, Twitter Inc. acquired Snappy TV, a company that was helping broadcasters and rights holders to share video content across social media and via Twitter's Amplify program. Major industry players in the social TV market are creating different platforms to build different kinds of interactions. The global social TV market includes key players such as Spredfast, Inc., Sprinklr Inc., Telescope, Inc., Flowics, Snipperwall, iPowow Ltd, Sprout Social Inc., Socialbakers Ltd., Megaphone Inc., never.no, SentabTV, Talkwalker Inc., and Vizrt Group AS.

For more information on this press release visit: http://www.sbwire.com/press-releases/social-tv-market-to-reach-us-34927-mn-by-2026-1106043.htm

EDA Tools Market for IC Industry (Component - Solution (Bundled, Standalone), Services (Managed, Professional); Application - Design, Simulation, Verification; Deployment - Cloud based (Private Cloud, Public Cloud, Hybrid Cloud), On-Premise) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2018 - 2026

Albany, NY -- (SBWIRE) -- 12/19/2018 -- According to a new market report published by Transparency Market Research, the global EDA tools market for IC industry is expected to reach a value of US$ 3,031.7 Mn by 2026, supported by rising adoption of compliance initiatives, improved operational efficiency, and controlled workflow. The market is projected to expand at a CAGR of 6.8% during the forecast period from 2018 to 2026.The highly competitive environment has compelled players to focus on efficient manufacturing techniques. In addition, rising penetration of VLSI (Very-large-scale integration) is boosting the global demand for advanced and sophisticated EDA tools. Asia Pacific is anticipated to be the fastest growing region for the market during the forecast period which is expected to be followed by Europe. The EDA tools market is experiencing flourishing growth in terms of adoption across different industry verticals around the globe. Increasing implementation of Big Data analytics and artificial intelligence by vendors is further contributing to the growth of the EDA tools market for IC industry.

Obtain Report Details @ https://www.transparencymarketresearch.com/eda-tools-market.html

Growing list of EDA tools vendors likely to boost the growth of the market over the forecast period

The growth of EDA tools is directly or indirectly related to the growth of E-CAD (Electronic Computer Aided Design), as most vendors offer EDA tools as an add-on feature to their overall E-CAD solutions. Adoption of EDA tools by small and medium-sized enterprises (SMEs) is increasing mainly due to cost efficiency as well as limited capital investment required for subscription based (cloud) services. Adoption of cloud based EDA tools in an organization for cost cutting and time savings (process optimization) is fuelling the growth of the market substantially with the trend expected to be maintained during the forecast period.

EDA Tools Market for IC Industry: Scope of the Report

The EDA tools market for IC industry has been segmented on the basis of parameters such as component, application, deployment, and geographical regions. In terms of component, the market has been segmented into solution and services. The solution segment has further been segmented into bundled and standalone while the services segment has been classified into managed and professional services. Based on application, the market has been divided into design, verification, and simulation. In terms of deployment, the market has been segmented into cloud and on-premise. The cloud segment has further been classified into private cloud, public cloud, and hybrid cloud. The report covers the analysis of these segments across North America, Europe, Asia Pacific, Middle East & Africa, and South America, along with the qualitative analysis of market estimates supplementing the growth of the EDA tools market for IC industry during the forecast period. Private and hybrid cloud segments are anticipated to experience lucrative growth opportunities in the market. In terms of adoption of EDA tools, the private cloud segment is projected to expand at a CAGR of approximately 7.6% during the forecast period from 2018 to 2026.

Request a PDF Sample of EDA Tools Market - https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=27110

North America and Europe collectively accounted for more than 50% of the global market share in 2017, with North America holding larger share of the market. Technological developments and relatively higher maturity in terms of technology penetration are major drivers of the EDA tools market for IC industry in North America. Within the Europe EDA tools market for IC industry, Germany held the largest revenue share in 2017, closely followed by the U.K. The market in Asia Pacific, which includes China, India, Japan, and Rest of Asia Pacific, is expected to witness the fastest growth during the forecast period attributed to rapid technological developments in various industry verticals across different countries. Moreover, several emerging economies in the region experiencing growth in their infrastructure which covers the government sector, IT sector, law firms, chemical industry, and others, is further supporting the growth of the EDA tools market for IC industry in this region.

For more information on this press release visit: http://www.sbwire.com/press-releases/eda-tools-market-for-ic-industry-growing-list-of-eda-tools-vendors-1106048.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Exterior Insulation and Finishing System (EIFS) is an insulating, decorative, and protective finish system for exterior walls that can be installed on any type of construction. It is the only exterior wall covering that insulates and provides weather protection in a selection of shapes, colors, and textures that can replicate almost any architectural style or finish material, or stand by itself as an architectural finish. EIFS is wall cladding that utilizes stiff insulation boards on the outside of a wall and a plaster-like exterior covering. EIFS employs organic polymeric finishes reinforced with glass mesh. EIFS can be effective for both new construction and recladding applications, as an energy-efficient, economical wall covering. After World War II, buildings throughout Germany were damaged and in need of resurfacing. EIFS originated in Germany and came to the U.S. in the late 1960s.

Get Research Report Overview @ https://www.transparencymarketresearch.com/exterior-insulation-finishing-system-market.html

EIFS, if installed properly, makes the building energy efficient. The EIFS costs more initially; however, it pays for itself over time. Structures with EIFS can save between 20% and 30% on energy bills as per the Oak Ridge National Laboratory. Aesthetics and creative freedom are the perks offered by EIFS. Expanded polystyrene (EPS) is a part of the system that can be cut or molded to create several shapes such as arches, columns, window details, and sculptures. EIFS costs less than traditional insulation materials. It does not encroach upon the interior area, as it is fitted on the outside. EIFS can be installed in extremely hot or cold places that otherwise are unlikely to accommodate construction. EIFS installations are technically challenging. Inexperienced workers plus fast-tracked construction can compromise the quality of EIFS. This could result in leak or holes in EIFS or worse. This is the primary restraining factor for the EIFS market.

Based on design, the exterior insulation and finish system (EIFS) market can be segmented into class Polymer based (PB), class Polymer Modified (Polymer Modified), Direct-applied Exterior Finish System (DEFS), and EIFS with drainage. Class PB is also known as 'soft coat' EIFS. It utilizes adhesively fastened expanded polystyrene (EPS) insulation with glass fiber reinforcing mesh embedded in a nominal base coat. Class PB represents the majority of EIFS used in North America. Class PM is also known as 'hard coat' EIFS. In class PM EIFS, reinforcing mesh is mechanically attached to the extruded polystyrene (XPS) insulation, over which a thick, cementitious base coat is applied. Class PM EIFS was developed for improved impact resistance. DEFS is an EIFS without insulation. DEFS are mainly used for soffits, stairwells, and high-impact prone areas that don't require insulation. EIFS with drainage is also known as 'rain screen EIFS'.

n terms of geography, the EIFS market can be segregated into North America, Latin America, Europe, Asia Pacific, and Middle East & Africa (MEA). North America and Europe are key markets for EIFS. The market in MEA and Asia Pacific is relatively small, as compared to the market in Europe and North America.

Get PDF Brochure for more Professional & Technical industry insights: https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=38789

Key players operating in the exterior insulation and finish systems (EIFS) market are BASF Corporation, RMAX, Dryvit Systems, Inc., Parex USA, Inc., Sto Corp., Lafargeholcim Ltd, The Dow Chemical Company, Saint-Gobain Weber, and Aliva UK Ltd.

About Transparency Market Research
Transparency Market Research (TMR) is a U.S.-based provider of syndicated research, customized research, and consulting services. TMR's global and regional market intelligence coverage includes industries such as pharmaceutical, chemicals and materials, technology and media, food and beverages, and consumer goods, among others. Each TMR research report provides clients with a 360-degree view of the market with statistical forecasts, competitive landscape, detailed segmentation, key trends, and strategic recommendations.

Contact us:

Transparency Market Research

90 State Street,

Suite 700,

Albany

NY – 12207

United States

Tel: +1-518-618-1030

USA – Canada Toll Free 866-552-3453

Email: sales@transparencymarketresearch.com

Website:http://www.transparencymarketresearch.com/

For more information on this press release visit: http://www.sbwire.com/press-releases/exterior-insulation-and-finish/release-1106051.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Glue dispenser is a device used to release the required amount of glue/adhesive on the area of application. It is an ideal choice for the application of high performance adhesives. The adhesive is applied directly from a tube or bottle onto the surface in some operations, while in others, precise and automated dispensing is required. Glue dispenser enables cost-efficient bonding solution for various applications integrated into the production line. Hand held glue/adhesive dispensers such as hot glue sticks and industrial glue guns are used widely. However, a broad range of other glue dispensers is also available in the market. For specialized tasks, a hand held dispenser is often an ideal choice, as it provides user with full control over the operation. An automotive production line requires power driven glue dispenser, which runs on electricity or compressed air. Glue dispenser can be used to apply adhesive in any form; liquid, spray, or slurry. This is one of the major advantage of glue dispensers.

Get Research Report Overview @ https://www.transparencymarketresearch.com/glue-dispenser-market.html

Different methods are used to apply adhesives. These include syringing and stenciling. In stenciling, a plate accurately cut to required dimension is placed over the surface or material to be bonded. The adhesive is then applied over the plate and the plate is removed leaving behind adhesive only in the places where the plate had been cut. After this, surface or material on which adhesive is applied is kept in the same place for some time until the adhesive forms an appropriate bond. Under syringing, the glue is dispensed by the pick and place method on the bonding material only in specific places where it is required. Syringing method creates less waste, but requires larger operation time, since the adhesive is to be applied to each segment individually.

The market for glue dispenser is primarily driven by the increase in demand for adhesive dispensing systems and equipment. Hassle free, convenient, and precise application of adhesive, particularly in packaging, automotive, and electronics industries, is expected to boost the demand for glue dispensers in the near future. Demand for glue dispensing system has been rising owing to its affordable cost and low wastage of adhesives. Glue dispenser is available in various ranges with different configurations. It can be customized for specific applications including dispense rate, shot size, media viscosity, and volumetric quantity.

Based on technology, the glue dispenser market can be segmented into hand held, machine mounted, robotic, rotary, and others. Increase in need for precision and accuracy coupled with an urge to use highly configured adhesive dispensing equipment is expected to propel the machine mounted and rotary glue dispenser equipment. In terms of application, the glue dispenser market can be segregated into automotive, packaging, electronics, construction, lamination, textile, and others. Increase in population, growth in economy, rise in purchasing power parity, and rapid rate of urbanization have resulted in commercial and infrastructure development in developing countries such as India and China. These factors have also boosted the demand for automobiles, electronic gadgets, furniture and woodworking projects, home construction, and medical disposable products. This is likely to augment the glue dispenser market in the near future.

Get PDF Brochure for more Professional & Technical industry insights: https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=38858

In terms of geography, North America and Europe are mature markets for glue dispensers. Demand for glue dispensers is primarily driven by Asia Pacific due to the growth in end-user industries such as packaging, automotive, construction, and electronics in countries such as India and China. The packaging industry in India has been expanding at a double-digit rate. The automotive industry is also anticipated to offer lucrative opportunities to the glue dispenser market in the near future.

Key players operating in the glue dispenser market include Henkel Ltd., Dymax Corporation, Valco Melton, and Nordson Corporation.

About Transparency Market Research
Transparency Market Research (TMR) is a U.S.-based provider of syndicated research, customized research, and consulting services. TMR's global and regional market intelligence coverage includes industries such as pharmaceutical, chemicals and materials, technology and media, food and beverages, and consumer goods, among others. Each TMR research report provides clients with a 360-degree view of the market with statistical forecasts, competitive landscape, detailed segmentation, key trends, and strategic recommendations.

Contact us:

Transparency Market Research

90 State Street,

Suite 700,

Albany

NY – 12207

United States

Tel: +1-518-618-1030

USA – Canada Toll Free 866-552-3453

Email:sales@transparencymarketresearch.com

Website:http://www.transparencymarketresearch.com/

For more information on this press release visit: http://www.sbwire.com/press-releases/glue-dispenser-market/release-1106075.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Transparency Market Research has published a new market report titled "Spirotetramat Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2014 - 2020," which observes that the global spirotetramat market demand was valued at US$ 172.5 million in 2013 and is expected to reach US$ 233.1 million by 2020, expanding at a CAGR of 4.4% between 2014 and 2020.

Read Report Overview @
https://www.transparencymarketresearch.com/spirotetramat-market.html

Spirotetramat is a tetramic acid derivative and belongs to class of ketoenols. Exceptional qualities of spirotetramat as an insecticide on various vegetable crops and fruits are anticipated to drive the market growth between 2014 and 2020. Spirotetramat disrupts lipogenesis in plants by inhibiting acetyl CoA carboxylase. Spirotetramat can be transported throughout the plants from leaves to roots and vice-versa while other most of the insecticides available in the market have one-way transport system.

Increasing pest resistance to existing pesticides, other than spirotetramat, is one of the major driving factors for global spirotetramat market. Moreover, adoption of insecticides which reduces the overall cost of pest management and increases the crops yield is further expected to boost the market growth of spirotetramat during the forecast period. However, ban on spirotetramat by federal law in some states in the U.S. and high cost of this product due to patents is anticipated to hamper the market growth. Companies operating in the market are likely to gain opportunities after the patent expiration of spirotetramat.

Fruits emerged as the largest crop segment of the global spirotetramat market, accounting for 60.9% volume share in 2013. Vegetable crops are expected to grow at a moderate rate from 2014 to 2020. Cotton accounted for smaller share of the market with extensive use in Asia Pacific. Other crop segment includes nuts, hops, cereals, spices, etc. Other crops are expected to grow at a sluggish rate during the forecast period owing to other substitutes available in the market.

Request to view Sample Report:
https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=3687

The global spirotetramat market was dominated by North America in 2013 due to high demand for spirotetramat for mealybugs, scales and whiteflies. Rest of the World is projected to be the fastest growing region in the global spirotetramat market. It is widely used on citrus fruits, grapes, starwberries, etc. in the region. In terms of revenue, Asia Pacific market is expected to reach over US$ 51 Mn by 2020. The European market is expected to grow at a significant rate in the next few years due to large application of spirotetramat to grapes and oranges.

The global spirotetramat market is highly consolidated in nature, with a single manufacturer i.e. Bayer CropScience operating in the market. Spirotetramat is available in the market under Bayer's brands Movento, Ultor and Kontos. The patent acquired by Bayer CropScience is likely to expire by 2017. New entrants in the market are expected after 2017, thus creating new growth opportunities.

For more information on this press release visit: http://www.sbwire.com/press-releases/global-spirotetramat-market-is-expected-to-reach-us-2331-million-in-2020-tmr-1106077.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Diethylenetriamine, also abbreviated as DETA serves as an organic compound. It is a colorless hygroscopic liquid which is soluble in polar organic solvents and water, but not simple hydrocarbons. DETA is the structural analogue of diethylene glycol, with chemical properties resembling to those of ethylene diamine with similar uses. Diethylenetriamine is a byproduct which is formed from manufacturing ethylene diamine from ethylene dichloride. DETA is used in a wide range of applications such as oil field chemicals, agrochemicals, personal care, water treatment, automotive and textile chemicals among others.

Read Report Overview @
https://www.transparencymarketresearch.com/diethylenetriamine-market.html

Rising demand from end-use industries is expected to drive the diethylenetriamine market. End-use industries include automotive, construction, personal care, agriculture, oil & gas and other major industries. Developing countries, particularly in the Asia Pacific region are the major contributors to the rising building & construction industry. Industrial as well as residential construction in China, Latin America, Middle East, India and other developing regions are the highest contributors of the global building & construction industry revenue. Additionally, growing automotive industry globally is expected to boost the market growth. Automotive industry is witnessing tremendous growth in developing countries. Diethylenetriamine is used in the manufacture of various resins, lubricants and additives which are part of automotive industry. Furthermore, burgeoning oil & gas industry is further expected to boost the diethylenetriamine market. These serve as indispensable part of oil-field chemicals as they are mostly used as chelating agents and lubricants.

However, environmental regulations regarding use of hazardous raw materials are expected to hamper the market growth for diethylenetriamine market. Several regulatory bodies such as EPA and OSHA also have stringent regulations about storage and transport of hazardous raw materials. In addition, availability and cost of raw materials is anticipated to be major hurdle for the growth of diethylenetriamine market. Development of bio-based polyamines is expected to provide opportunities for the players in the market. Furthermore, development of high quality and application specific products is expected to be an important opportunity to invest in the next few years. Diverse product development with wide range of applications would help the companies to maintain their market share. For instance, demand for diethylenetriamine based products that can be used in the manufacture of wind turbine blades will continue to expand at significant rate. Additionally, growth in end-use industries in developing economies of Latin America and Middle East are expected to provide immense opportunities in the next few years.

Request to view Sample Report:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=3815

Asia Pacific accounts for the largest market for diethylenetriamine in terms of consumption and production. China is the largest contributor of the diethylenetriamine demand as it hosts all major end-use industries such as automotive, electronics, coatings, textiles and medical. Owing to rising manufacturing sector and industrialization the demand for diethylenetriamine has been increasing at steady pace in the region and is expected to grow at the fastest pace in the next few years. Developed economies such as North America followed Asia Pacific in terms of consumption. Europe is matured market in terms of consumption as compared to North America and Asia Pacific. Environmental regulations in the region are expected to hamper the consumption. Rest of the World is expected to grow steadily due to increasing demand from end-use industries.

AkzoNobel N.V., BASF SE, Diamines and Chemicals Ltd., Huntsman Corporation, and The Dow Chemical Company are some of the key manufacturers of diethylenetriamine, dominating the market.

For more information on this press release visit: http://www.sbwire.com/press-releases/diethylenetriamine-market-to-record-study-growth-by-2025-tmr-1106090.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Polycarbonate diols are chemically studied to be thermoplastic building blocks for polyurethane dispersions and polyurethane compounds such as thermoplastic polyurethane (TPU) and thermoplastic elastomers (TPE). They offer better compatibility with several polyols and solvents and easy handling with their viscous nature at room temperature. Oxidative degradation resistance, intrinsic flexibility, and hydrolytic stability are key properties possessed by polycarbonate diols. Other properties such as optical, temperature resistance, and impact resistance could help polycarbonate diols to play the role of engineering or commodity plastics.

Read Report Overview @
https://www.transparencymarketresearch.com/polycarbonate-diols-market.html

The global polycarbonate diols market could be classified according to type and application. With a broad study of each segment of the market, the authors of the report have unveiled some crucial opportunities for industry players. Besides this, the segmentation study will allow readers to gain a good insight into key segments likely to attract demand in the coming years.

The report offered herewith is an ideal evaluation of the global polycarbonate diols market that facilitates easy but informed decision making while assessing key trends, opportunities, competitive landscape, and important market figures. Players could be able to evaluate the profiles of their competitors in order to achieve a competitive edge in the global polycarbonate diols market.

Global Polycarbonate Diols Market: Trends and Opportunities

The growth of the world polycarbonate diols market is prognosticated to be propelled by the increasing demand for data storage devices, including Blu-ray Discs, DVDs, and CDs, and other types of consumer electronics. Participants operating in the world polycarbonate diols market could be advantaged with a high demand resting on the back of flame-retardant and heat-resistance properties of the product. These properties are expected to increase the usage of polycarbonate diols as a choice material in the manufacture of electronic gadgets.

Apart from covering greenhouses, the world polycarbonate diols market could invite other vital applications in the construction and building sector, such as the construction of dome lights and curved or flat glazing systems. Cockpit canopies and automotive headlights also require polycarbonate diols, owing to their high-impact resistance and lightweight properties. As a result, vendors in the world polycarbonate diols market are expected to cash in on the growing demand from the aerospace and automotive sector.

One of the factors that could hamper the growth of the world polycarbonate diols market is the presence of ecologically harmful compound bisphenol A in the product. However, the rising GDPs of developing economies are predicted to offer new avenues of growth in the world polycarbonate diols market.

Request to view Sample Report:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=3903

Global Polycarbonate Diols Market: Geographical Study

Asia Pacific is prophesied by the analysts to cling onto a significant share in the international polycarbonate diols market on account of the favorable growth of its automobile and electronics sectors. China could be a larger exporter of polycarbonate diols apart from being a giant consumer and producer in the international polycarbonate diols market. Consequently, the Asia Pacific country is foretold to showcase a telling dominance in the international polycarbonate diols market. Other regions such as Europe and countries such as the U.S. could also considerably contribute toward the growth of the international polycarbonate diols market while riding on their flourishing aerospace industry.

Global Polycarbonate Diols Market: Companies Mentioned

Of all the leading players in the worldwide polycarbonate diols market, Haiyan Huashuaite Plastics Electric Appliances Co., Ishii Chemicals Co., Ltd., Jinan Haohua Industry Co., Ltd., ICC Industries, Inc., and Hangzhou Dayangchem Co., Ltd. could make their presence known.

For more information on this press release visit: http://www.sbwire.com/press-releases/polycarbonate-diols-market-latest-trends-demand-and-analysis-2024-tmr-1106100.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Fungicides are biocidal chemical compounds which are primarily used to inhibit the growthof fungi. Fungicides are one of the major chemicals used in agriculture to counter the fungal infections. Fungicides can be majorly classified in three classes based on the mode of action as contact, systemic and translaminar fungicides. Azoxystrobin belongs to the class of systemic fungicides as it is taken up through the xylem vessels. Azoxystrobin is typically used in fruits and vegetables for preventing the fungal infection. The growth in agriculture industry across the globe is anticipated to drive the market for azoxystrobin in the next six years. The demand for azoxystrobin and in general fungicide is expected to remain moderate in developed regions owing to the several restrictions imposed on the fungicides. On the other hand, developing economies across Asia Pacific region such as India and China are expected to have rising demand for fungicides in the next few years.

Read Report Overview @
https://www.transparencymarketresearch.com/azoxystrobin-market.html

Azoxystrobin belongs to the chemical family of Strobilurins. They are based on naturally occurring anti-fungal compounds. Azoxystrobin is one of the most recognized fungicides as it has a broad spectrum of anti-fungal properties against diseases including oomycota (infecting grapes), deuteromycota (infecting rice) and ascomycota (affecting numerous field crops and vegetables).

Azoxystrobin is typically sold in the water formulation or as a suspension concentrate in numerous concentrations. Azoxystrobin in general applied as a foliar spray as azoxystrobin has an extensive residual effect. Azoxystrobin acts as a systemic fungicide and has a curative, translaminar and preventative mode of action. The effective mode of action of azoxystrobin makes it essential fungicide in field crops, grapes and banana. Moreover, the toxicity level of azoxystrobin being moderate for mammals, bees, insects, birds and earthworms as azoxystrobin is easily broken in sub-components once applied through soil. Azoxystrobin is widely used in farming, particularly in wheat farming as it provides strong protection to wheat crops against several types of diseases such as wheat septoria, septoria leaf spot, wheat leaf rust, rye leaf rust and powdery mildew. The wide range of fungicidal properties of azoxystrobin is expected to act as a major driver for azoxystrobin market in agriculture industry in the next six years. However, the aquatic toxicity of azoxystrobin is considerably high, posing a great threat to aquatic animals. This factor is anticipated to act as a potential restraint to azoxystrobin market in the next few years.

Request to view Sample Report:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=3951

The developing economies across Asia Pacific region are anticipated to be the fastest growing market for azoxystrobin in the next few years. The main reason for this is the rising demand for fungicides to control the growth of fungi and related problems associated with spread of infection through it. Moreover, the demand for azoxystrobin is expected to remain high in the countries such as China and India due to growing need for better yield for fulfilling the increasing food demand from the constantly escalating population. In addition to developing nations, developed economies are concentrating on attaining highest agriculture output from the available cultivable land.

Presently, azoxystrobin is approved for use on a wide variety of crops in the UK, including barley, asparagus, broccoli, onions, carrots, cauliflowers, cabbages, potatoes, rye, triticale, vining peas and wheat. Additionally as azoxystrobin is effective against numerous classes of fungi, makes azoxystrobin an economical solution for treatment of various types of fungi. All these factors are creating a positive prospect for the global fungicide industry in general. This reason is expected to have a positive impact on azoxystrobin market thus, boosting the demand for azoxystrobin fungicide across the globe. Some of the major manufacturers of azoxystrobin fungicide are Syngenta and Cheminova, Inc. USA.

For more information on this press release visit: http://www.sbwire.com/press-releases/azoxystrobin-market-emerging-trends-and-strong-application-scope-by-2020-tmr-1106107.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Silicone enamel is a silicone resin finish paint based on a combination of silicone resin and pigments. Silicone enamel is mainly used to coat aluminized steel pipes. It has excellent heat resistance, adhesion to steel surface and weathering resistance. Silicones are widely used in the coating industries as materials to protect and preserve but mainly for aesthetics. In silicone enamel silicone polymers are used as additives and silicone resins as the main component, or binder.

Read Report Overview @
https://www.transparencymarketresearch.com/silicone-enamel-market.html

Paints for exterior surfaces are exposed to sunlight in wet, dry, hot and cold conditions. The combination of UV radiation, variable temperature and humidity rapidly degrades organic polymers, roughening the coating surface and exposing the pigments. Hence, solvent-borne alkyds and acrylics are blended with silicone resins to improve their weathering performance.

Silicones enamel offers the decorative coating to improve the sustainability of products, and promise to deliver even greater performance in the near future. In the coatings market, silicone additives are well known for the surface properties they bring to the coatings formulator which includes slip, abrasion resistance, wetting, leveling and defoaming. These materials improve the sustainability of decorative coatings, for both architectural and wood coating applications. Improvements to increase the longevity of coatings and the ability to use fewer natural resources, such as titanium dioxide, are characteristics that Si-based materials can deliver.

Almost all fields of construction industry require application of silicone enamel in various forms. The building & construction industry is one of the largest markets in the world in terms of revenue generation. The key drivers for the global building & construction market are the growing world population and growing urbanization in the Asia Pacific region. The growth of the building & construction market is fueled due to urbanization and changing lifestyles in emerging economies such as China and India. The rising population and changing lifestyles of consumers are expected to drive the market. Thus, the growing world population coupled with the rise in the building & construction market is anticipated to drive the silicone enamel market in the coming years. The consumption of paints is significantly rising due to their growing demand from various end user segments. Silicone enamels are consumed in various applications such as residential buildings, skyscrapers, bridges, sidewalks, highways, houses and dams among others.

Request to view Sample Report:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=4009

In addition, growing urbanization trend is expected to drive the demand for silicone enamel. Silicone enamels are required in abundance by manufacturing and construction industries, which have witnessed exemplary growth in the recently industrialized economies of the BRIC nations. Huge foreign investments into Brazil, Russia, India, and China have spurred the growth in infrastructure development in these countries. The growth of residential, non-residential and infrastructure development has been due to strong economic growth and population explosion in these parts of the world. The growth of the construction market has directly influenced the growth of the silicone enamel industry, which employs them in huge quantities. This trend is expected to continue over the foreseeable future as rapid urbanization is in progress. However, mature markets of the developed countries may hamper the demand for silicone enamel over the next few years.

In 2013, Asia Pacific was the major contributor to the silicone enamel market followed by Middle-East on account of the growth in architectural designs, corporate offices and residential complexes. South Africa region is the third largest consumer of silicone enamel followed by Europe. North America witnessed a steady growth in the consumption of silicone enamel. This trend is expected to continue within the forecast period.

Some of the key players in the global silicone enamel market are Dow Corning, Wacker Chemie AG, Bluestar Silicones, MG Chemicals, Nippon Paints and Silicone Coatings (Pvt) Ltd among others.

For more information on this press release visit: http://www.sbwire.com/press-releases/silicone-enamel-market-industry-trends-and-impacting-factors-applications-to-2023-tmr-1106112.htm

Albany, NY -- (SBWIRE) -- 12/19/2018 -- Copper ammonium carbonate is an inorganic fungicide primarily utilized for wood treatment and in copper tolerant crops such as wheat, tomato, barley, sugarbeets, cherries, carrots, strawberries, almonds, apples, lettuce and bananas among several others. The fungicide is available in aqueous solution formulation in the market. Copper Ammonium Carbonate fungicide is utilized as a broad spectrum fungicide employed against eyespot, early leaf spots (Mycosphaerella arachidis), Fusarium spp., net blotches, phoma leaf spots, powdery mildew, Septoria nodorum, Rhynchosporium secalis, Sclerotium rolfsii, Sclerotinia sclerotiorum, Septoria tritici, rust and tan spots. Copper ammonium carbonate fungicide is phytotoxic in nature and must be employed after dilution with water. Copper ammonium carbonate fungicide is applied through seed treatment or foliar application. It is a systemic fungicide that acts as a curative, preventive as well as eradicative solution. Copper ammonium carbonate fungicide after being absorbed moves to the target fungal cells and interferes with sterol synthesis leading to membrane disruption of the target pathogen. Copper ammonium carbonate fungicide is toxic to aquatic flora and has low bio-accumulation potential. The material becomes toxic over acute exposure on regular basis to animals. Prolonged exposure may cause skin and eye irritation in humans.

Read Report Overview @
https://www.transparencymarketresearch.com/copper-ammonium-carbonate-market.html

Copper ammonium carbonate fungicides are primarily used as broad spectrum fungicides for use on wheat barley, oats, oilseed rape, rye, and durum wheat. They are extensively used by Indian wheat farmers and other well irrigated crops. Copper ammonium carbonate is sold in combined formulation with several other fungicides, such as fluoxastrobin, spiroxamine, tebuconazole, trifloxystrobin, bifaxen, and floupyram among others.

The copper ammonium carbonate fungicide market is driven by its rising food demand for the booming global population and reducing arable land. Rising food security concerns and limited arable land area is putting pressure on farmers to increase yields to meet the global demand. However, rising awareness about the harmful effects of fungicides and other toxic agrochemicals among the general population along with stringent environmental regulations, especially in developed countries of North America and Europe is expected to be the major restraining factor for the copper ammonium carbonate fungicide market. This opposition to use of chemicals in agriculture has caused a shift towards organic farming and development of better and less harmful substitutes for these chemicals.

In terms of geography, Asia Pacific is the largest consumer of copper ammonium carbonate fungicide riding on high sales of fungicide products to its large population base. Major agricultural economies including China, India and Indonesia are the major consumers of copper ammonium carbonate fungicide for application in a variety of crops. Two of the most populated countries, China and India are situated in Asia. Both these countries are growing rapidly and witnessing rising disposable income and purchase power parity of the general population. This in turn is expected to drive demand for food grains and further for copper ammonium carbonate fungicide.

Request to view Sample Report:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=4034

Major market players have established their production facilities in Asia owing to the availability of cheap labor and land and comparatively lenient norms and regulations against chemicals. North America is another major consumer for copper ammonium carbonate fungicide especially in the well irrigated southern land in the Mississippi and Missouri areas of the U.S. In Rest of the World, Brazil, South Africa and Central Africa contribute to major demand for the market. Europe is expected to witness comparatively slower growth than other regions due to stringent government control over potentially harmful agrochemicals and general tendency of farmers towards sustainable organic farming techniques.

Some of the market players include Monsanto, Bayer CropScience, Syngenta AG, SinoHarvest Corporation, Shanghai Mingdou Agrochemical Co. Ltd. and Shanghai Tenglong Agrochemical Co. Ltd., among others.

For more information on this press release visit: http://www.sbwire.com/press-releases/copper-ammonium-carbonate-market-generationregulations-and-company-profiles-report-to-2023-tmr-1106113.htm

Albany, NY -- (SBWIRE) -- 12/20/2018 -- 2,6-Dimethyl-2-heptanol is an organic compound that belongs to the family of secondary alcohols. Also known as diisobutyl carbinol, it is found in the form of colorless to pale yellow liquid with sweet odor. It is slightly soluble in water; however, 2,6-Dimethyl-2-heptanol is miscible with most organic solvents. Key features of 2,6-Dimethyl-2-heptanol include high boiling point, slow evaporation, low density, low emission of volatile organic compounds, lack of hazardous air pollutants, strong solvency and good viscosity, and surface tension reduction in high solids coatings.

For More Industrial Insights Get PDF Brochure:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=20636

2,6-Dimethyl-2-heptanol is used as a solvent in many industrial applications such as extraction of acetic acid, ethyl acetate, methyl ethyl ketone, and ethanol from aqueous solution. It is used as an extraction solvent for neptunium, niobium, protactinium, and zirconium-88. It is also employed in the manufacture of hydrogen peroxide, shellac, lacquers, printing inks, and resins such as urea-melamine resins, vinyl-chloride-acetate resins, and alkyd resins. 2,6-Dimethyl-2-heptanol is used as a floating agent and surface active agent in the production of rubber and plastics. It is used as a precursor in the manufacture of brake fluids. 2,6-Dimethyl-2-heptanol is employed as a defoaming agent in the manufacture of paperboard and chemical intermediate for dyes, perfume, pesticides, pharmaceuticals, lubricants, and lube oil additives. It is used as a wetting agent in lithographic printing. Furthermore, it is employed for the extraction of vitamins and minerals. 2,6-Dimethyl-2-heptanol is biodegradable and is considered non-toxic to fish and other aquatic organisms on an acute basis.

Based on concentration, the 2,6-Dimethyl-2-heptanol market can be segmented into 98.0%, 98.5% 99.0%, and 99.5%. Demand for 98.0% and 98.5% concentration based products is expected to be higher due to the large consumption in rubber chemicals, aroma chemicals, printing inks, adhesives coatings, specialty intermediates, lube additives, and paints & coatings industries. In terms of consumption, rising demand for lube oil additives is expected to be the primary factor driving the 2,6-Dimethyl-2-heptanol market. Increase in usage in the resin industry is also anticipated to boost market growth. Furthermore, it delivers specific performance characteristics such as low VOC emission and strong solvency due to its compatibility with other organic solvents. These are some of the other factors augmenting the 2,6-Dimethyl-2-heptanol market. Supply of 2,6-Dimethyl-2-heptanol is frequently inadequate due to the limited availability of diisobutyl ketone, which acts as a chemical intermediate during the production process. This is likely to restrain the market growth. However, development of bio-based feedstock for 2,6-Dimethyl-2-heptanol can help create opportunities for market players and suppliers.

Request for Customization:
https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=20636

Key players operating in the 2,6-Dimethyl-2-heptanol market are Eastman Chemical Company, The Dow Chemical Company, Huntsman Corporation, Solvay Group, and Mitsui Chemicals.

For more information on this press release visit: http://www.sbwire.com/press-releases/26-dimethyl-2-heptanol-market-latest-trends-demand-and-analysis-2024-1106922.htm

Albany, NY -- (SBWIRE) -- 12/20/2018 -- The global geopolymer market is projected to witness robust growth throughout the forecast period. The rising focus of key players on technological developments and innovations is one of the vital factors estimated to encourage the growth of the global geopolymer market in the next few years. In addition, the expansion of application base is expected to generate promising opportunities for the key players operating in the global geopolymer market. With the help of these drivers, the global market for geopolymer is expected to register an impressive growth throughout the forecast period.

The research study offers a detailed analysis of the global geopolymer market, presenting insights into the key growth prospects and opportunities. In addition, the research study throws light on the primary drivers, restraints, latest trends, and the challenges in the global geopolymer market. The key segmentation of the global geopolymer market has been provided in the scope of the research study, along with a detailed overview of the market share and expected growth rate of each leading segment. In addition, a thorough overview of the competitive landscape of the global geopolymer market has been highlighted in the research study, with a detailed list of the leading players operating in it.

For More Industrial Insights Get PDF Brochure:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=17726

Global Geopolymer Market: Drivers and Barriers

The rising number of applications of geopolymer is one of the key factors expected to encourage the growth of the global polymer market in the next few years. The growing demand for geopolymer across diverse industries, owing to its heat and fire resistance is projected to accelerate the growth of the overall market in the next few years. In addition, the booming construction industry in developing economies across the globe is expected to fuel the growth of the overall market in the coming few years.

On the flip side, the moderate growth of construction industry in developed economies is expected to restrict the growth of the global geopolymer market in the coming few years. Nevertheless, the rising awareness and popularity among consumers regarding the benefits of using geopolymer products is anticipated to encourage the growth of the global geopolymer market in the next few years. In addition, with rising number of innovations and research and development activities in this field is projected to accelerate the growth of the market in the forecast period.

Request for Customization:
https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=17726

Companies Mentioned in the Research Report

Some of the key players operating in the global geopolymer market are ASK Chemicals, Zeobond, Milliken Infrastructure Solutions, Wagner Global, INOMAT GmbH, Schlumberger Limited, Ceske lupkove zavody, Alchemy Geopolymer, Ecocem, PCI Augsburg GmbH (Basf), and Fengyuan Chemical. The termendosuly rising demand for geopolymer is expected to attract a large number of players to expand their product horizon and create a niche for themselves. This is projected to strengthen the competitive scenario of the global geopolymer market in the next few years.

For more information on this press release visit: http://www.sbwire.com/press-releases/geopolymer-concrete-market-latest-report-with-forecast-2016-24-1106924.htm

Albany, NY -- (SBWIRE) -- 12/20/2018 -- In terms of type of problem, the global concrete repair system market can be classified into new build defects, service & maintenance, and age-related deterioration. New build defects are problems that occur either during or soon after the construction of the infrastructure. The service & maintenance segment includes regular strengthening of the concrete, for example, by repairing cracks and other such problems when they are at an initial stage. This not only improves the quality of the infrastructure, but also helps in prolonging its life. Age-related deterioration of concrete and other materials involved in the infrastructure is common and needs to be addressed every few years.

Concrete repair system can be defined as the various methods and compounds applied to concrete walls and other concrete structures in order to support their working condition. Concrete is used in a variety of infrastructure, ranging from residential, commercial, and industrial buildings to roads, highways, bridges, and other structures such as museums, railway stations, and airports, thereby making it a fairly large market. Investments made in concrete infrastructure are high and, therefore, it is essential that the infrastructure and its concrete remain in good working condition. This makes the concrete repair system an important market.

The global concrete repair system market can be segmented along several lines such as type of problem, type of solution, and method of application.

For More Industrial Insights Get PDF Brochure:

https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=35123

More importantly, in terms of type of solution, the global concrete repair system market can be divided into coatings, sealers & primers, bonding agents & waterproofing compounds, mortars, and others. Coatings, sealers & primers are used for a wide range of purposes such as anti-corrosion, steel reinforcement, concrete strengthening, and decoration. Mortars are primarily used for sticking one material to another. For example, it is used between bricks and blocks or between tiles and floor or wall. The primary purpose of bonding agents & waterproofing compounds is to enhance the joining of structures without employing mechanical fasteners. They help in improving the tensile strength of the concrete and its ability to withstand corrosion. Finally, the others section consists of various concrete repair solutions such as epoxy adhesives & concrete, polyurethane compounds, grouts, gels, and self-levelling screeds, etc.

Request for Customization:
https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=35123

Some of the major companies in the global concrete repair system market include the Sika Group, Fosroc International Limited, BASF Corporation, KREISEL Technika Budowlana Sp. z o.o., MAPEI Corporation, ARDEX Americas, Chemco International Ltd., Saint-Gobain Construction Products UK Limited, and Kryton International Inc.

For more information on this press release visit: http://www.sbwire.com/press-releases/concrete-repair-system-market-trends-share-growth-rate-opportunities-and-market-forecast-2017-2025-1106925.htm

Albany, NY -- (SBWIRE) -- 12/20/2018 -- Metal Packaging plays an important role in the process of packaging and preservation. Globally, metal packaging has been witnessing a strong growth over the past few years on account of increasing health consciousness among consumers. There are several types of metal packaging used across the world. Use of cans is one of the most widely used type of metal packaging and it has become an important part of the human diet in developed and developing countries during past few years. It is of more value in those parts of the world where no or limited refrigeration exist for storing food. It is a mean of safely preserving foodstuffs, medicines, chemicals, etc. without microbiological deterioration. The global metal packaging is projected to reach more than US$ 150 Bn by 2026, with a decent CAGR in the forecast period.

For More Industrial Insights Get PDF Brochure:
https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=4748

Global Metal Packaging Market Dynamics

Metal packaging has a lucrative business opportunity, since it has excellent printability, cost effective- high speed filling & packaging, glossy & high aesthetic value over other packaging materials. The market of global Metal Packaging is anticipated to be driven by many factors such as rise in packaged food intake, and beverages, particularly the increased consumption and use of canned fruits and vegetables and the trend towards 'on-the-go' lifestyles among progressively time-poor consumers. Nutrition retentive properties of metal packaging is one of the significant factors driving the market. The growth of pharmaceutical industry and personal care industry is another major reason for the increasing demand of metal packaging. However, the increasing awareness of environmental concerns, and the adoption of new regulatory necessities on packaging recycling and the introduction of HDPE and PET bottles in packaging industry is anticipated to hinder the future growth of metal packaging market growth. To counter the alternative packaging material market, the metal packaging companies are also focusing on developing new metal packaging material prototypes and different product marketing strategies in order to keep on developing the market share in the global metal packaging market.

Global Metal Packaging Market Segmentation

The global Metal Packaging market is segmented on the basis of product types such as cans, drums & pails, aerosols, lids, tubes, trays & foils, caps & closure and others. On the basis of metals used, the global metal packaging is segmented into aluminum, steel, tin and iron. On the basis of end use industry, the global metal packaging is divided into food & beverages industry (whipped cream, beer bottles, etc.), food services industry (catering services, etc.), oil & gas industry (storage of petroleum, etc.), chemical industry (storage of industrial solvents, etc.), personal care industry (deodorants, shave products, etc.), household products (air fresheners, crockery, etc.), industrial use (degreasers, spray paints, etc.) and many others.

Request for Customization:
https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=4748

Global Metal Packaging Market Players

The major players identified across the value chain of global Metal Packaging market include Amcor of Limited, Ardagh Group, Alcoa Incorporated, CPMC, Manaksia Group, Emballator Metal Group, Crown Holdings, Grief Incorporated, Silgan Holdings, Rexam Plc, Jamestrong Packaging, Shetron Group, Ton Yi Industrial, Bericap Group, GM Metal Packaging Ltd., Fujian Fuzhen Metal Packaging Co. Ltd., etc. The companies are emphasizing on research and development and new product development in order to maintain the competitive advantage in global metal packaging market during the forecast period. Acquisitions and mergers are very rare in metal packaging market, which is the key strategy executed by major market players to gain competitive advantage.

For more information on this press release visit: http://www.sbwire.com/press-releases/metal-packaging-market-observe-substantial-growth-by-2016-2024-1106926.htm

Consumer Identity Access Management Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2017 - 2025

Albany, NY -- (SBWIRE) -- 12/20/2018 -- An identity access management system can be defined as a framework for business processes that manages electronic identities. This framework includes the technology and policies needed to support identity management. Identity access management (IAM) technology initiates, captures, records and manages consumer identities and their associated access permissions. This ensures that all individuals and services are properly authorized, authenticated, and audited and access is granted according to one's interpretation of policy. Organizations are required to maintain the flow of business data and simultaneously manage its access. With more services and devices to be managed than ever before with requirements for associated access privileges, has led to the need for effective identity and access management systems. In the long term, consumers would want to take more control of identity and reveal only those things to the service provider that are relevant to the service provider they work with. Consumers would want to do it with better security and without exposing private information.

Obtain Report Details @ https://www.transparencymarketresearch.com/consumer-identity-access-management-market.html

In recent years, legacy approaches to IAM such as Identity Manager or Active Directory are failing organizations as these products cannot manage consumer access. Organizations feel that without a plan for a consumer centric approach to IAM, factors such as unsafe password management, unfettered use of Dropbox, shadow IT etc. are challenging IT. Modern businesses want to leverage the power of personal data, simultaneously protecting it, particularly when the data resides across different systems. Almost every company has an IAM solution for their employees. However, these solutions are often inadequate for managing consumer identities. Employee IAM solution lacks the features which balance the convenience and security of a great consumer experience. Consumer identity access management (CIAM) solutions manage end-to-end data security in the organization to keep valuable consumer information safe from attack.

Organizations are unsure of their ability to safeguard their consumer data due to increased frequency and scale of data breaches. CIAM solutions offer security right from authentication to reduce the risk of losing reputation, revenue, and most importantly consumer trust which is driving the consumer identity access management market. Moreover, CIAM solutions enables unified customer profiles and simplified access so that the customer can obtain a seamless experience which is also driving the consumer identity access management market. On the other hand, applications accessed by consumers are also accessed by employees for various reasons. Every application accessed by customers is used by employees which poses a question on the need for separate CIAM solutions which is restraining the growth of consumer identity access management. As applications, websites, services, and customers continue to grow, the data collected on each customer is also increasing. In addition, many vertical markets and customer facing industries experience extreme peak in the data collected due to seasonality or other reasons which is creating opportunities for the growth of the consumer identity access management market. Moreover, growing usage of cloud computing in deploying CIAM solutions is also creating growth opportunity for the CIAM solution market.

The global consumer identity access management market is segmented on the basis of component, deployment mode, end use, and region. In terms of component, the market can be segmented into solutions and services. The solution segment can be classified on the basis of advanced authentication and identity proofing services. The services segment is further sub-segmented into professional services and managed services. The market is classified in terms of deployment mode into cloud and on-premises. On the basis of end use, the market is classified into banking, financial services & insurance, energy and utilities, healthcare, retail, IT and telecom, and others (manufacturing and government). The market is segmented in terms of geographical regions into North America, Asia Pacific, Middle East & Africa (MEA), South America, and Europe.

Get PDF Sample for this Research Report @ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=35591

Industry participants dominating the consumer identity access management market with significant developments are Centrify Corporation, Okta, Inc., Onegini, TransUnion, Ping Identity, Traxion Inc., GB Group PLC, Experian PLC, Janrain, and Mitek Systems Inc., among others.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

For more information on this press release visit: http://www.sbwire.com/press-releases/consumer-identity-access-management-market-growing-usage-of-cloud-computing-in-deploying-cliam-solutions-1106931.htm